China water ring vacuum pump

Water ring vacuum pump is a type of coarse vacuum pump, and its vacuum degree is affected by various factors, including the type of working fluid, pump structure design, and working conditions. The following is a detailed summary of the vacuum degree of the water ring vacuum pump:

 Limit vacuum degree of water ring vacuum pump

1. Use water as the working fluid: When using water as the working fluid, the limit vacuum degree of the water ring vacuum pump can usually reach 2000~4000Pa. This range is determined based on the structural design and working conditions of the pump, and is also a typical performance of water ring vacuum pumps at room temperature and pressure.

2. Using oil as working fluid: When using oil (such as transformer oil) as working fluid, the limit vacuum degree of the water ring vacuum pump can be significantly improved, usually reaching 130Pa or lower. This is because the saturated vapor pressure of oil is lower, allowing it to remain liquid at lower pressures, thereby providing better vacuum effects.

Factors affecting the vacuum degree of water ring vacuum pump

1. Temperature of working fluid: The temperature of working fluid has a significant impact on the vacuum degree of water ring vacuum pump. Generally speaking, reducing the temperature of the working fluid can lower its saturated vapor pressure, thereby increasing the vacuum degree. However, excessively low working fluid temperature may also cause the pump body to freeze or cause other problems.

2. Structural design of the pump: The structural design of the pump is also an important factor affecting the vacuum degree. For example, the gap between the rotor and the pump casing, as well as the shape and number of impellers, can all affect the pumping efficiency and vacuum degree of the pump.

3. Working conditions: Working conditions (such as suction pressure, exhaust pressure, gas temperature, etc.) can also affect the vacuum degree of the water ring vacuum pump. In practical applications, it is necessary to choose the appropriate pump type and parameters based on specific working conditions.

Methods to improve the vacuum degree of water ring vacuum pump

1. Optimize the working fluid: Choosing a working fluid with lower saturation vapor pressure (such as low viscosity industrial oil) can improve the vacuum degree. Meanwhile, maintaining the cleanliness and appropriate temperature of the working fluid are also key to improving the vacuum degree.

2. Adjust the structural design of the pump: By optimizing the structural design of the pump (such as reducing the gap between the rotor and the pump casing, improving the shape and number of impellers, etc.), the pumping efficiency and vacuum degree of the pump can be improved.

3. Improving working conditions: By adjusting working conditions such as suction pressure, exhaust pressure, and gas temperature, the performance of the water ring vacuum pump can be improved and its vacuum degree can be increased.

In summary, the vacuum degree of a water ring vacuum pump is affected by various factors, and its limit vacuum degree can usually reach 2000-4000Pa when using water as the working fluid, while it can reach even lower levels when using oil as the working fluid. In practical applications, it is necessary to select the appropriate pump type and parameters based on specific working conditions and requirements, and improve the vacuum degree by optimizing the working fluid, adjusting the pump structure design, and improving working conditions.

If you also need a water ring vacuum pump, please contact me! We are a professional manufacturer of water ring vacuum pump, and we will bring you high-quality products and excellent services.